If you thought the ombré technique was reserved for the hairdresser, think again.
- Plascon Double Velvet Ravine (EC 62) 1 litre
- Plascon Polvin Light Blue Green (G6-A2-2) 1 litre
- Plascon Polvin Aqua Pool (G6-A1-4) 1 litre
- acrylic scumble glaze
- Lay-on brush
- Mutton cloth
TIME NEEDED: 2 hours
BEFORE YOU START:
Prepare the walls and paint two coats of Plascon Double Velvet Ravine as a base. Mix the glazes as follows: Glaze 1: 60% Aqua Pool, 30% scumble glaze and 10% water. Glaze 2: 60% Light Blue Green, 30% scumble glaze and 10% water.
Starting at the top right-hand corner of the wall and working in an area of approximately one square metre at a time, lay on the darker glaze (glaze 1) in a random crisscross manner.
Soften the brush marks with a lighter crisscross motion using the same brush or another clean brush. For an even softer look, you can blend using mutton cloth whilst the paint is still wet.
As you work down the wall, start adding the lighter glaze (glaze 2), making sure you keep a wet edge so that you can blend the colours well. Fade out into the base colour approximately halfway down the wall.