Surface Preparation Guide for Plascon Multiseal for general surfaces, galvanised and steel substrates and rusted areas

Ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

Ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

Ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

Ensure that surfaces are dry, sound and free from dust, dirt, grease and oil before painting.

Ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

Surfaces must be clean, firm (sound) and thoroughly dry before painting.

Before using Plascon Polvin Walls & Ceilings, ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

Before using Plascon Eggshell Walls & Trims paint, ensure that surfaces are dry, sound and free from dust, dirt, grease and oil before painting.

Before using Plascon Suede paint, ensure that surfaces are dry, sound and free from dust, dirt, grease and oil before painting.

Remove all traces of temporary protective coating, dirt, grease, etc. from the surface using METALCARE GALVANISED IRON CLEANER. Remove all traces of the cleaner by rinsing with fresh water.

To obtain the best performance the surface must be prepared correctly before application.